MDJCJ-2000 Electric Torque Wrench Calibrator 200-2000N.m

MDJCJ series torque tester is a split type large range torque tester. Widely used in production control systems, it is an easy-to-operate, high-accuracy and economical testing tool.

1. Features
(1) The magnitude of the torque is displayed in a clear digital display, so the reading is simple and accurate;
(2) With maximum hold (PEAK/PPEAK) measurement mode;
(3) The structure part is simple and firm;
(4) The instrument is easy to carry, light and powered by rechargeable batteries.


2. Technical parameters
Measuring range: see the table below:

(1) Measurement accuracy: ±1.0%FS ±1 word
(2) Measurement method: peak hold (PEAK)
(3) Measurement direction: forward and reverse measurement
(4) Alarm prompt: overload alarm / low battery indication
(5) Fully charged use time: about 20 hours
(6) Charger parameters: AC 220V input DC 7.2V/400mA output

3. Matters needing attention

(1) Do not place the test instrument in dusty, vibrating, direct sunlight or corrosive gas (use it), and use it in a place with an ambient temperature of 0°C to 40°C and a humidity below 70%;

(2) All functions of this tester can be used after the power is turned on, but in order to achieve the accuracy within the index, please preheat for more than 5 minutes;

(3) Do not use torque tools that exceed the maximum allowable load to avoid damage to the instrument;

(4) Do not knock or place heavy objects on the display;

(5) When using, first determine whether the LCD display value of the torque instrument in the tracking state shows zero, because the instrument is very sensitive to environmental conditions;

(6) Do not open the back cover to check various components, or do so for other reasons;

(7) The charging time should not exceed 6 hours; do not use the charger for other purposes;

Third-party measurement and test reports are available, as follows